Next, get a very long screwdriver, or better yet, a small pry bar. Wedge it into the hub assembly so that when you press it up, it will move the front of the assembly down. The spring for the front suspension is very strong, so it will take some muscle to move it. It can help at this point to have a friend assist you. One person should work the screwdriver or pry bar, and the other should take care of the dampener. You want to move the front of the hub assembly down so that the bottom of the dampener lines up with the hole on the assembly for the bottom bolt. Once you have it lined up, slide the bottom bolt through the hub assembly arm and the bottom of the dampener.

Previous Page

Tech Home

Next Page